Description
All of our tanks have been purpose made for the Campervan industry. They provide a convenient and hygienic solution to supplying fresh water for your vehicle, or for storing waste water.
The tank is manufactured from high quality polyethylene plastic which provides excellent underfloor durability and is algae and corrosive resistant. An access hatch is built into all tanks to allow you to fit additional components such as an inlet or water pump etc. and allow periodic cleaning.
| COMPATIBILITY | WATER TANK | WASTE TANK |
| CITROEN RELAY (2006-2019) L2 & L3 FIAT DUCATO (2006-2019) L2 & L3 PEUGEOT BOXER (2006-2019) L2 & L3 | 75L Tank L: 1000 mm W: 300 mm D: 225 mm This tank fits widthways (driver to passenger side) across the van in the void between the two chassis members, directly behind the exhaust box. The service hatch will face upwards with the corner cut out going around the handbrake cable. | 40L Tank L: 840 mm W: 370 mm D: 150 mm The tank is positioned on the chassis, using the chassis rail as its mounting point due to its shallow design.
|
| CITROEN RELAY (2006-2019) L4 FIAT DUCATO (2006-2019) L4 PEUGEOT BOXER (2006-2019) L4 | 75L Tank L: 1000 mm W: 300 mm D: 225 mm This tank fits widthways (driver to passenger side) across the van in the void between the two chassis members, directly behind the exhaust box. The service hatch will face upwards with the corner cut out going around the handbrake cable. | 75L Tank L: 1000 mm W: 300 mm D: 225 mm The L4 allows for x2 75L tanks, providing there are no aftermarket modifications on your van. The second tank is placed in one of the open bays (unobstructed by the handbrake), facilitated by the presence of two chassis rails across the passenger side. |
| FIAT TALENTO (2016-2022) L1 & L2 NISSAN NV300 (2014-2022) L1 & L2 NISSAN PRIMASTAR (2001-2014) L1 & L2 RENAULT TRAFIC (2001-2022) L1 & L2 VAUXHALL VIVARO (2001-2019) L1 & L2 | 24L Tank L: 690 mm W: 265 mm D: 140 mm CUSTOM BRACKETS REQUIRED | |
| FORD CUSTOM (2012-2022) L1 & L2 | 40L Tank L: 840 mm W: 370 mm D: 150 mm | |
| VW CRAFTER (2006-2018) MERCEDES SPRINTER (2006 – 2016) | 58L Tank L: 1080 mm W: 300 mm D: 200 mm | |
| VW T5 / T5.1 VW T6 / T6.1 | 60L Tank L: 960mm W: 920mm D: 210mm Fits around the spare wheel at the rear of the chassis. CUSTOM BRACKETS REQUIRED | 30L Tank L: 1400mm W: 230mm D: 160mm The 30L tank is located centrally within the van. The placement is determined by a cut-out in the middle of the van, with the exhaust serving as the reference point for positioning. CUSTOM BRACKETS REQUIRED |
| MAN TGE/VW CRAFTER FWD, RWD, LWB, XLWB and 4WD variants from 2017 onwards MAN TGE/VW CRAFTER FWD, RWD, LWB, XLWB and 4WD variants from 2017 onwards | 82L Tank L: 1700 mm W: 320 mm D: 150 mm This tank fits up against three chassis members underneath the van. The front and middle rails sit up against the tank, but a spacer will need to be added between the tank and third chassis rail towards the back of the van to ensure the tank sits evenly. CUSTOM BRACKETS REQUIRED | 30L Tank L: 1400mm W: 230mm D: 160mm The 30L tank is located centrally within the van. The placement is determined by a cut-out in the middle of the van, with the exhaust serving as the reference point for positioning. CUSTOM BRACKETS REQUIRED |
